By November 2, 2021 Read More →

University begins new chapter with sensor-controlled lighting

The University of Reading has installed a new ecofriendly sensor-controlled lighting in its library as part of a £40m redevelopment.

The library building on the Whiteknights campus has undergone a major refurbishment and has had new LED lighting and lighting controls installed as part of its programme to close the book on energy wastage and improve upon its carbon footprint.

The University has refurbished the remaining floors and put in place a more sustainable study environment by creating new heating and ventilation systems, replacement windows, cladding and roofing, in addition to the new lighting and controls. It aims to cut energy use by 40 per cent and reduce carbon emissions by 30%. Lighting controls manufacturer B.E.G. created the lighting design for the library which included LED luminaries with compatible DALI controls. The LED lighting and controls were installed by Bracknellbased electrical contractors, Antham Electrical. B.E.G. specification director Tom Greenrod said: “The University of Reading was keen to have a lighting control system that staff could maintain and adjust themselves so we proposed our range of DALI broadcast sensors for this purpose. “The DALI master can be programmed with a dedicated handheld remote control or a universal Bluetooth remote using a smartphone and the B.E.G. One App. The master can work in either presence mode which is selected by the dip switch or via the remote control.

“The master has its own power supply and intelligence and can control up to 50 DALI ballasts. To increase the detection range of the master, a slave sensor can be used which only detects movement. It is possible for up to eight slaves to be wired back to the master. “DALI luminaires were installed in the basement and, despite there being no natural daylight down there, the BEG DALI sensors meant the maximum light level could be adjusted to the required design level.

“With LED luminaires being very efficient the initial installation can be over-lit and so the capability to reduce the light level is of great benefit to the University in terms of both limiting possible glare or strain but also reducing its energy consumption.

“Most lighting designs allow for a 0.8 maintenance factor so the installation can be over-lit by 20 per cent. The BEG DALI sensor can adjust the maximum level to the required design level giving an immediate energy saving of 20%. “The BEG DALI master also has the benefit of an orientation light level too which provides a low-level setting of 10-30 per cent of maximum light when the area is unoccupied.”

 

 

For further information please contact info@beguk.co.uk

Posted in: Advertorial
Tags: